Why you should choose the Vrida 1 extension arm 0.5m
- The Vrida extension arm 0.5m is firstly designed for anyone who wants to move the pendant light a little bit. For example, when the pendant light isn´t centered over the table or if you have the annoying problem when you hit your head on the pendant lamp because its in the wrong position. The displacement is infinitely variable between 12 cm – 25 cm, but sometimes it is just that little reposition that is required to create the right feeling in the room.
- Secondly, Vrida is for those who don’t like drilling holes in the ceiling. In addition, the extension arm is hung on an existing ceiling socket or ceiling hook, so there is no impact on the ceiling. The support end has a furniture pad and is not attached to the ceiling. For this reason, the extension arm can be adjusted again and again without visible traces in the ceiling. You can also easily take down the extension arm for one pendant lamp and use it in the next room or even the next home.
- Thirdly, Vrida extension arm is a Swedish-made and complete solution where all cabling is integrated into the wooden extension arm. With Vrida extension arm for one pendant, you therefore avoid visible cables or adhesive residues from hanging cable strips in the ceiling. Since the ceiling socket is located at the end of the extension arm, it can be rotated 360 degrees from the existing ceiling hook/socket.
- Fourthly, Vrida extension arm for one pendant lamp suits you if you want to hang your pendant light in a new place in the room, redecorate temporarily when you have the extension plate in the table or simply like to redecorate often! Vrida is therefore suitable for most homes and most pendant lights.
In summary, Vrida extension arm 0.5 meter is perfect for those looking for a Swedish quality product with top-class function and design.
DCL – new EU standard for ceiling sockets
When you buy a Vrida, it comes with the new type of DCL ceiling socket which is according to a common EU standard that applies from 1 April 2019. Vrida extension arms fit both DCL ceiling sockets and other/older/previous types of ceiling hook/sockets that have the electricity near the position of the ceiling hook/socket.
When you order a Vrida extension arm, the following two products are included free of charge:
Lamp plug Grounded – Older standard SKU-5-250071
The lamp plugs are of both the new and older standard that are being used in Sweden and Finland. For other countries we recommend that you connect Vrida extension arm with the same procedure that you would if you connected a pendant lamp. This means that you as a customer can install the standard that you have in your home. Instructions for installing a lamp plug (both DCL and older standard) can be found here: Instructions for installing a plug
In some countries electrical installation work may only be carried out by a authorised electrical contractor. Contact your local electricity authority for advice.
Instruction manual: Vrida 1 english
Specification |
|
| Width | 3,3 cm |
| Height | 8,3 cm |
| Length | 49 cm |
| Cord | Yes, integrated |
| Light source included | No |
| Plug | Yes (for ceiling socket) |
| Max Watt | 500 w |
| Rotatable | 360° |
| Slideable | 12-25 cm (moving the position of the pendant lamp) |
| Distance to nearest wall | Minimum 19 cm when the reposition of the pendant lamp is 25 cm.
Minimum 33 cm when the reposition of the pendant lamp is 12 cm. The minimum distance between the excisting ceiling hook/socket and the wall depends on how long the new position of the pendant lamp is from the excisting ceiling hook/socket. The extension arm has a support end that needs space in the opposite direction to where the pendant lamp is to be moved. |
| Recommended weights | Weight of pendant lamp| Possible displacement*
<5.0 kg 12 – 25 cm *The load on the existing ceiling socket depends on the weight of the pendant lamp and how long displacement that is made. Above are listed possible displacements at different weights. If the recommendations are followed, the existing ceiling hook/socket is not loaded with more than 15 kg. (15 kg is a common maximum weight on a ceiling DCL socket). |
