Why you should choose the Vrida 1 extension arm 2m
- Firstly, the Vrida extension arm 2 meters is our longest arm, which is designed for anyone who wants to make a long displacement of their pendant light. For example, when the pendant light is hanging in the wrong part of the room. The displacement is infinitely variable between 38 cm – 150 cm.
- Secondly, Vrida extension arm is for those who don’t like drilling holes in the ceiling. You hang the extension arm on an existing ceiling socket or ceiling hook, which means that you avoid any impact on the ceiling. The support end has a furniture pad and is not attached to the ceiling. The extension arm can be adjusted again and again without visible traces in the ceiling. You can easily take down the extension arm and use it in the next room or even the next home.
- Thirdly, Vrida is a Swedish-made and complete solution where all cabling is integrated into the wooden arm. With Vrida extension arm you therefore avoid visible cables or adhesive residues from hanging cable strips in the ceiling. The ceiling socket is located at the end of the extension arm and can be rotated 360 degrees from the existing ceiling socket/hook.
- Fourthly, Vrida is suitable for you if you want to hang your pendant light in a new place in the room, redecorate temporarily when you have the extension plate in the table or simply like to redecorate often! Vrida fits most homes and most pendant lights.
In summary, Vrida 2 meter is perfect for those who are looking for a Swedish quality product with top-class function and design.
DCL – new EU standard for ceiling sockets
When you buy a Vrida, it comes with the new type of DCL ceiling socket which is according to a common EU standard that applies from 1 April 2019. Vrida extension arms fit both DCL ceiling sockets and other/older/previous types of ceiling hook/sockets that have the electricity near the position of the ceiling hook/socket.
When you order a Vrida extension arm, the following two products are included free of charge:
Lamp plug Grounded – Older standard SKU-5-250071
The lamp plugs are of both the new and older standard that are being used in Sweden and Finland. For other countries we recommend that you connect Vrida extension arm with the same procedure that you would if you connected a pendant lamp. This means that you as a customer can install the standard that you have in your home. Instructions for installing a lamp plug (both DCL and older standard) can be found here: Instructions for installing a plug
In some countries electrical installation work may only be carried out by a authorised electrical contractor. Contact your local electricity authority for advice.
Instruction manual: Vrida 1 english
Specification |
|
| Width | 3.3 cm |
| Height | 8.3 cm |
| Length | 199 cm |
| Cord | Yes, integrated |
| Light source included | No |
| Plug | Yes (for ceiling socket) |
| Max Watt | 500 w |
| Rotatable | 360° |
| Slideable | 38-150 cm (moving the position of the pendant lamp) |
| Distance to nearest wall | Minimum 44 cm when the reposition of the pendant lamp is 150 cm.
Minimum 156 cm when the reposition of the pendant lamp is 38 cm. The minimum distance between the excisting ceiling hook/socket and the wall depends on how long the new position of the pendant lamp is from the excisting ceiling hook/socket. The extension arm has a support end that needs space in the opposite direction to where the pendant lamp is to be moved. |
| Recommended weights | Weight of pendant lamp| Possible displacement*
0.5 kg 80 – 150 cm < 2.0 kg 38 – 150 cm < 3.0 kg 38 – 135 cm < 4.0 kg 38 – 120 cm < 5.0 kg 38 – 105 cm < 6.0 kg 38 – 90 cm *The load on the existing ceiling socket depends on the weight of the pendant lamp and how long displacement that is made. Above are listed possible displacements at different weights. If the recommendations are followed, the existing ceiling hook/socket is not loaded with more than 15 kg. (15 kg is a common maximum weight on a ceiling DCL socket). |
