Why you should choose Vrida Duo 1.2 m for two pendant lights
- Firstly, the Vrida Duo extension arm 1.2 m is suitable for anyone who has only one ceiling socket/hook and wants two pendant lights. For example, over a dining table or kitchen island. The distance between the pendant lamps can be easily adjusted whenever you want.
- Secondly, Vrida Duo is for those who don’t like drilling new holes in the ceiling to get two pendant lights. The extension arm therefore hangs on an existing ceiling socket or ceiling hook. The support end also have a furniture pad and are not attached to the ceiling. The extension arm for two pendants lights can therefore be adjusted again and again without visible traces in the ceiling. You can also easily take down the extension arm and use it in the next room or even the next home.
- Thirdly, all Vrida extension arms are Swedish-made and complete solutions where all wiring is integrated into the wooden extension arm. With Vrida, there are no visible cables or adhesive residues from hanging cable strips in the ceiling. The ceiling sockets are located on either side of the suspension and can be adjusted individually. The extension arm can also be suspended in any direction from the hook in the ceiling.
In summary, Vrida Duo extension arm 1.2 metres is perfect for those who are looking for a Swedish quality product with top-class function and Nordic design.
DCL – new EU standard for ceiling sockets
When you buy a Vrida, it comes with the new type of DCL ceiling socket which is according to a common EU standard that applies from 1 April 2019. Vrida extension arms fit both DCL ceiling sockets and other/older/previous types of ceiling hook/sockets that have the electricity near the position of the ceiling hook/socket.
When you order a Vrida extension arm, the following two products are included free of charge:
Lamp plug Grounded – Older standard SKU-5-250071
The lamp plugs are of both the new and older standard that are being used in Sweden and Finland. For other countries we recommend that you connect Vrida extension arm with the same procedure that you would if you connected a pendant lamp. This means that you as a customer can install the standard that you have in your home. Instructions for installing a lamp plug (both DCL and older standard) can be found here: Instructions for installing a plug
In some countries electrical installation work may only be carried out by a authorised electrical contractor. Contact your local electricity authority for advice.
Instruction manual: Vrida Duo english
Specification – Vrida Duo for two ceiling lights |
|
| Width | 3,3 cm |
| Height | 8,3 cm |
| Length | 116 cm |
| Cord | Yes, integrated |
| Light source included | No |
| Plug | Yes (for ceiling socket) |
| Max Watt | 500 w |
| Rotatable | 360° (select direction before hanging) |
| Sliding | 33-103 cm (between pendant lights) |
| Distance to nearest wall | Minimum 47 cm distance between the excisting ceiling hook/socket and the wall.
The extension arm has two support ends that needs space. |
| Recommended weights | Weight per pendant lamps| Possible displacement*.
<3.5 kg (7kg total) | 35 – 103 cm between lamps *The load on the existing ceiling socket depends on the weight of the pendant lamp and how long displacement that is made. Above are listed possible displacements at different weights. If the recommendations are followed, the existing ceiling hook/socket is not loaded with more than 15 kg. (15 kg is a common maximum weight on a ceiling DCL socket). It is your responsibility to ensure that your roof outlet can handle the load. |
